INNOGRIP AntiSlip is completely environmentally friendly (does not require a hazard symbol on the label).
Instructions for use INNOGRIP AntiSlip in and around the house:
The use of INNOGRIP AntiSlip for making slippery floors and surfaces slippery and safe. This product also works on wet and damp floors and surfaces. The product is ready for use and can be applied in different ways. This depends on the floor or surface you want to treat.
We make a distinction in the use for in and around the house (e.g. walk-in shower, shower tray, bathtub, bathroom floor, kitchen floor, terrace, garden tiles and entrance) and in professional use (e.g. swimming pools, saunas, staircases, entrances, galleries (at residential complexes), public parking garages, shops, shopping centers, supermarkets, hospitals, care centers, hotels, public transport stations).
Bathroom user manual
You can make the walk-in shower or shower tray non-slip and safe with the help of our 250 ml spray bottle.
- First make sure that the surface is well degreased. This means you need to remove the invisible residue of skin fats, soap
- Then rinse it with water and dry the relevant surface thoroughly.
- Then spray INNOGRIP AntiSlip generously on the dry surface and rub the product from left to right with a lint-free cloth.
- Leave it on for at least 30 minutes. If necessary, you can then flush or mop the treated surface with warm water
- Then rinse it with water and dry the surface in question thoroughly.
If you want to treat the entire bathroom (recommended), depending on the size of the bathroom, you can also purchase a 2 liter jerry can and apply the product with a flat mop. You then pour a part of the product into a bucket and immerse the plane mop in the product. Then slightly wring out the surface mop and apply it to the surface to be treated.
Other slippery surfaces
For this you can use the 2 liter jerry can or a 5 liter jerry can and also treat it with a flat mop (see bathroom user manual).
In fact, all slippery floors in and around the house, except your parquet or wooden floor, can be treated (the treatment of a linoleum floor is also possible). Depending on the intensity of use of the treated surface, the treatment will have to be repeated after some time.
We recommend to repeat the treatment/application 2-3 a year for continuous non-slip and safe floors and surfaces. The number of repeat treatments vary per situation and the type of the surface.
Because the product does not give a chemical reaction (100% ecological), the original aspect (color, shine or structure) of the treated surface does not change, so you can apply the product without any risk.
As we say: “Prevention is better than cure”
Prevention is better than cure
Don't hesitate any longer and buy INNOGRIP AntiSlip today to make your slippery floor or surface non-slip and safe. Very quick and easy!
